Swindon Silicon Systems

Swindon’s enhanced analogue, digital and mixed-signal ASICs, designed to our customer’s demanding requirements, provides our customer’s end product with a distinct and unique technical and commercial advantage.

Swindon’s full turnkey service (FtK) starts from initial specifications through to the supply of volume tested and calibrated ASICs including in house analogue and mixed signal design, production test, packaging, logistics and supply chain management.

Swindon also provides full evaluation, characterisation, industrial and automotive qualification (e.g. AEC Q100) and full failure analysis in accordance with defined industry standards such as TS 16949.

Analogue IC design is one of Swindon’s primary areas of expertise. Over the years we have developed many analogue IP blocks which can be used across many applications.

Our proven analogue design covers many areas such as analogue to digital Convertors (ADC), digital to analogue Convertors (DAC), amplifiers (OP Amps, PGA, TIA, LNA, VGA etc), synthesizers, voltage regulators and convertors (many different architectures), voltage controlled oscillators (VCO’s), constant current generator and filters to name but a few.

Integrating a DSP or advanced processor onto your mixed signal ASIC, is common place today. Swindon has designs with anything from our own custom 16bit RISC microcontroller, an 8bit 8051 microcontroller, a custom processing block to an ARM Cortex processor.

We work with our automotive and industrial sensor customers to assess and then deliver the optimum architect for their application.

Swindon’s FtK service enables our customers to be able to focus on their core competencies whilst Swindon designs, manufactures, production tests and supplies their custom ASIC solution to anywhere in the world for the lifetime of their product.

Swindon is a leader in the design, production test and supply of industrial sensor interfaces, ASICs and MEMS, in applications such as position, proximity, pressure and temperature.

The use of mixed signal ASICs to provide an optimised solution is becoming more prevalent in industrial applications.

The sensor interface, where signal conversion of sensor data occurs, and the analysis, control and transmission of it is administered, is where the Swindon expertise comes to the fore.

The smart sensor (IIoT) is being utilised in many existing and emerging applications and the dynamic development of ASIC solutions is driving the future for us all.

At Swindon, we are committed to making industrial automation safer, smarter and greener through our design excellence and innovation. Our sensor interface ASICs bring together all these attributes to provide you with a winning formula.

Focused on future requirements and trends, our outstanding experience in sensing interface ICs for numerous industrial systems in the Industrial Internet of Things (IIoT) makes the world a safer place for millions of people every day.

Smart sensors are a reality in factory automation and control systems. Swindon’s engineering expertise and innovation in sensor interface ASICs for the connected world help engineers design intelligent and efficient factory automation and control systems that increase productivity, extend system life and save energy.

Swindon’s ASIC and MEMS technology is widely adopted by industrial manufacturers to help their products improve factory productivity and communicate with the connected world. The devices contain all the required functions to interface with your choice of sensor and can process that information and communicate the result which makes them ideal for the “Smart Factory” of today.

Higher performance, smaller size, lower cost, lower power consumption, longevity. All the attributes that a custom mixed signal ASIC from Swindon will deliver.

Swindon is the global leader in the design, production test and supply of tyre pressure monitoring systems (TPMS) custom ICs and other automotive sensor interfaces.

Swindon’s enhanced analogue, digital and mixed-signal ASICs, designed to our customer’s demanding requirements, provides our customer’s end product with a distinct and unique technical and commercial advantage.

Swindon’s full turnkey service (FtK) starts from initial specifications through to the supply of volume tested and calibrated ASICs including in house analogue and mixed signal design, production test, packaging, logistics and supply chain management.

Swindon also provides full evaluation, characterisation, industrial and automotive qualification (AEC Q100) and full failure analysis in accordance with defined industry standards such as TS 16949.

Swindon designs and delivers custom IC solutions that adhere to the Functional Safety standard ISO 26262. We work with our customers to determine the Automotive Safety Integrity level (ASIL) at the outset of the project.

Analogue IC design is one of Swindon’s primary areas of expertise. Over the years we have developed many analogue IP blocks which can be used across many applications.

Our proven analogue design covers many areas such as analogue to digital Convertors (ADC), digital to analogue Convertors (DAC), amplifiers (OP Amps, PGA, TIA, LNA, VGA etc), synthesizers, voltage regulators and convertors (many different architectures), voltage controlled oscillators (VCO’s), constant current generator and filters to name but a few.

Integrating a DSP or advanced processor onto your mixed signal ASIC, is common place today. Swindon has designs with anything from our own custom 16bit RISC microcontroller, an 8bit 8051 microcontroller, a custom processing block to an ARM Cortex processor.

We work with our automotive sensor customers to assess and then deliver the optimum architect for their application.

Swindon’s FtK service enables our customers to be able to focus on their core competencies whilst Swindon designs, manufactures, production tests and supplies their custom ASIC solution to anywhere in the world.