Find IC test socket

Gold Technologies

USA

With its own Engineering and Manufacturing facility and expertise, Gold Technologies can design and manufacture what you need in semiconductor testing – from spring probe pogo pins to connectors to test sockets/contactors – from prototype, validation, characterization to high volume ATE and Burn In.

My Golden Rule for Chip Production Testing

Chip production testing is probably the most underestimated task by ASIC development engineers. And yet, testing is an essential step with a direct impact on final chip cost.   Let’s start with the basics. Testing of chips is necessary because the chip manufacturing process cannot provide 100% yield. Silicon foundries and assembly ...

What is a Burn-in Board?

Burn in Board is a printed circuit board which functions as a jig in the Burn-in process. The Burn-in Board is used as part of the ASIC reliability testing process during which components are stressed to detect failures. Burn in Boards consist of sockets to accommodate the tested ASICs and ...

Andon Electronics

USA

Pioneer in the design and manufacture of innovative precision sockets used to test ICs and place them onto PC boards.

Introduction to LoadBoard Design and Production

LoadBoard (LB) is a mandatory, custom made PCB, that acts as a mechanical and electrical interface between the tester (ATE) and the device under test (DUT). LoadBoard has well-defined physical dimensions and it must fit perfectly into the tester.    It is one piece of the entire ASIC Test Solution and it ...

M Specialties

USA

M&M Specialties offers Engineering, Design, Manufacturing and Assembly services for semiconductor specific Test Boards and Test Sockets

ASIC design for the IoT

As everybody is trying to figure out what the Internet of Things (IoT) will look like and how connected things will work, I'd like to address a question that many people have: why design your own Integrated Circuit (IC) rather than just use an off-the-shelf processor, write software and be done?   In a nutshell, because ...

ASIC Design: From Spec to Chips

An Application Specific Integrated Circuit (ASIC) is a specialized integrated circuit crafted for a particular use or purpose. Typically, ASICs are tailored for products targeted for mass production, consolidating necessary electronics onto a single chip.     ASIC stands for “Application Specific Integrated Circuit.”   Despite the substantial initial design cost (known as NRE - ...

Abrel Products

Ireland

Abrel design and manufacture products for the reliability testing of semiconductor components.

Synergie-CAD

UK

30 years producing Semiconductor test solutions (Hardware and Software). Design, Simulation, Manufacture, Assembly, Test Development and more, all by Synergie-CAD.